homesitemapcontactus
corporateproductprojectstechnologycareer




1. Primary Coated Fiber
    Silica, acrylate
  2. Central Strength Member
    Glass fiber reinforced plastic
  3. Slotted Core
    HDPE (Natural)
  4. Filling Compound
    Thixotropic gel
  5. Inner Sheath
    Polyethylene (PE)
  6. Outer Sheath
    Nylon

   


DUCT INSTALLATION | UG SERIES

Slotted core design, loose fiber, 2-24 fibers, non-metallic, rodent protection
This is a rodent protection loose fiber with slotted core design cable for duct installation. The outer sheath is made of nylon. Nylon is known for its harder and tougher material characteristics compared to PE, thus provides good protection against rodents. Being completely non-metallic, it can be installed in environments where there are electrical interference, for example alongside power lines.

It can be supplied with up to 24 loose fibers; either single-mode, multimode or both.
The loose fiber, designed together with slotted core technique provides a cable with good fiber protection and easy installation.
Water blocking filling compound prevents water penetration along the cable.
 
TECHNICAL DATA
Temperature range*
operation
storage
installation
-30 to 70°C
-40 to 70°C
-10 to 55°C
Bending radius*
temporary unloaded
permanent and during installation
10 x cable diameter
15 x cable diameter
Tensile force*
during installation
permanent
2.0kN
1.5kN
Crush resistance*
  5.0kN
Water penetration
complies with IEC 60794-1-2-F5
Delivery information
cable weight
supplied lengths
drum type
130kg/km
2km - 8km
W11 - W20
* Tested in accordance with IEC 60794-1-2
For more product information, please call +60.3.5519.5699 or email us at marketing@opcom.com.my