
	1.	Eight Fiber Ribbon
		Silica, acrylate

	2.	Central Strength Member
		Glass fiber reinforced plastic

	3.	Slotted Core
		Polyethylene (PE)

	4.	Filling Compound
		Thixotropic gel

	5.	Sheath
		Polyethylene (PE)

DUCT INSTALLATION | UG SERIES

Slotted core design, eight fiber ribbon, 104-192 fibers, non-metallic

This is an eight fiber ribbon cable with slotted core design for duct installation. Being completely non-metallic, it can be installed in environment where there is electrical interference, for example alongside power lines.

Water blocking filling compound prevents water penetration along the cable.

It can be supplied with 104 to 192 fibers with eight fiber ribbon; either single-mode, multimode or both.

High-packing density of the fibers is provided with the ribbon technology. This enables a small outer diameter of the cable even for large fiber counts.

The flexibility of this cable design and the improved splicing properties of the ribbon technology reduces the cost of installation.

The strength member and the slotted core design provides superior protection for the ribbon fibers.

TECHNICAL DATA

Temperature range*
operation storage installation	-30 to 70°C -40 to 70°C -10 to 55°C
Performance of ribbon
strippability of ribbon stripping force ribbon	mechanical 10 - 20N
Bending radius*
temporary unloaded permanent and during installation	10 x cable diameter 15 x cable diameter
Tensile force*
during installation permanent	2.0kN 1.5kN
Crush resistance*
	6.0kN
Water penetration
complies with	IEC 60794-1-2-F5
Delivery information
cable weight supplied lengths drum type	210kg/km 2km - 8km W12 - W21
* Tested in accordance with IEC 60794-1-2

For more product information, please call +60.3.5519.5699 or email us at marketing@opcom.com.my


Copyright © 2005 - 2008 OPCOM CABLES SDN BHD. All Rights Reserved.