
	1.	Primary Coated Fiber
		Silica, acrylate

	2.	Tight Buffer
		Polyamide

	3.	Strength Member
		Aramide yarn in each unit

	4.	Central Strength Member
		Glass fiber reinforced plastic / polyethylene coating

	5.	Wrapping
		Polyester tape

	6.	Outer Sheath
	•	Polyvinyl chloride (PVC)
	•	Low Smoke Halogen Free Flame Retardant (LSHFFR)

INDOOR INSTALLATION | BK SERIES

Breakout cable design, 4-24 fibers, tight buffered fiber, non-metallic

Breakout cable design is a flexible, flame-retardant, non-jelly filled cable recommended for use in telecommunication stations for interconnection between the optical line system and the Optical Distribution Frame (ODF). It is also suitable for Local Area Network (LAN).

It can be supplied with up to 24 units of tight buffered fibers; either single-mode, multimode or both.

This cable can be terminated using a variety of connectors.

TECHNICAL DATA

Temperature range*
operation storage installation	-10 to 70°C -10 to 70°C -10 to 55°C
Bending radius*
	6 fibers	8 fibers	12 fibers	24 fibers
temporary unloaded permanent and during installation	10 x cable diameter 15 x cable diameter
Tensile force*
during installation permanent	1.5kN 1.0kN	1.5kN 1.0kN	1.5kN 1.0kN	2.0kN 1.5kN
Crush resistance*
	3.0kN	3.0kN	3.0kN	1.0kN
Delivery information
cable weight supplied lengths drum flange diameter	100kg/km 2km 1100mm	100kg/km 2km 1100mm	150kg/km 2km 1100mm	190kg/km 2km 1100mm
* Tested in accordance with IEC 60794-1-2

For more product information, please call +60.3.5519.5699 or email us at marketing@opcom.com.my


Copyright © 2005 - 2008 OPCOM CABLES SDN BHD. All Rights Reserved.