homesitemapcontactus
corporateproductprojectstechnologycareer






1. Primary Coated Fiber
    Silica, acrylate
  2. Loose Tube
    PBT
  3. Central Strength Member
    Fiber reinforced plastic
  4. Filling Compound
    Thixotropic gel
  5. Filling Compound
    Thixotropic gel
  6. Wrapping Tape
  7. Suspension Strand
    Steel wire 7 x 1.6mm
  8. Sheath
    Polyethylene (PE)
  9. Outer Sheath
    Polyethylene (PE)
 

   


AERIAL INSTALLATION | AE SERIES
Concentric core design, integral bearer "figure-8", loose fiber, 2-144 fibers, loose tube
This is an economical concentric design for aerial cable installation.
A suspension steel wire integrated (integral bearer) with the sheath creates the characteristics "figure-8" profile well known for easy installation.
It can be supplied with 2 to 144 fibers, either single-mode, multimode or both.
Water blocking filling compound prevents water penetration along the cable.
 
TECHNICAL DATA
Temperature range*
operation
storage
installation		 -30 to 70°C
-40 to 70°C
-10 to 55°C
Bending radius*
temporary unloaded
permanent (one turn) and during installation		 10 x cable diameter
15 x cable diameter
Tensile force*
during installation
permanent		 9.0kN
9.0kN
Crush resistance*
  2.5kN
Water penetration
complies with IEC 60794-1-2-F5
Delivery information
cable weight
supplied lengths
drum type		 290kg/km - 450kg/km
2km - 6km
W14 - W24
* Tested in accordance with IEC 60794-1-2
For more product information, please call +60.3.5519.5699 or email us at marketing@opcom.com.my
 
Copyright © 2005 - 2008 OPCOM CABLES SDN BHD. All Rights Reserved.