homesitemapcontactus
corporateproductprojectstechnologycareer





1. Eight Fiber Ribbon
    Silica, acrylate
  2. Central Strength Member
    Glass fiber reinforced plastic
  3. Slotted Core
    Polyethylene (PE)
  4. Filling Compound
    Thixotropic gel
  5. Suspension Strand
    Steel wire 7 x 1.6mm
  6. Sheath
    Polyethylene (PE)
  7. Inner Sheath
    Polyethylene (PE)
  8. Amouring
    Corrugated steel tape
  9. Outer Sheath
    Polyethylene (PE)
 

   


AERIAL INSTALLATION | AE SERIES

Slotted core design, integral bearer "figure-8", eight fiber ribbon, 104-192 fibers, corrugated steel tape armouring
This is a light armoured cable for aerial installation. The corrugated steel tape armouring provides good protection against rodents yet allows the cable to retain outstanding flexibility for easy installation.

A suspension steel wire integrated (integral bearer) with the sheath creates the characteristic "figure-8" profile well known for easy installation.
It can be supplied with 4 to 96 fibers; either single-mode, multimode or both.
High packing density of the fibers are provided by the ribbon technology. This permits small outer diameter for the cable despite the large fiber count.
The slotted core cable has high crush load resistance. The radial shape of the slotted core profile provides an effective cavity for the ribbons to rest in.
Water blocking filling compound prevents water penetration along the cable.
 
TECHNICAL DATA
Temperature range*
operation
storage
installation
-30 to 70°C
-40 to 70°C
-10 to 55°C
Performance of ribbon
strippability of ribbon
stripping force ribbon
mechanical
10 - 20N
Bending radius*
temporary unloaded
permanent (one turn) and during installation
10 x cable diameter
15 x cable diameter
Tensile force*
during installation
permanent
9.0kN
9.0kN
Crush resistance*
  7.0kN
Water penetration
complies with IEC 60794-1-2-F5
Delivery information
cable weight
supplied lengths
drum type
580kg/km
1km - 3km
W21 - W24
* Tested in accordance with IEC 60794-1-2
For more product information, please call +60.3.5519.5699 or email us at marketing@opcom.com.my