
	1.	Four Fiber Ribbon
		Silica, acrylate

	2.	Central Strength Member
		Glass fiber reinforced plastic

	3.	Slotted Core
		Polyethylene (PE)

	4.	Filling Compound
		Thixotropic gel

	5.	Suspension Strand
		Steel wire 7 x 1.6mm

	6.	Sheath
		Polyethylene (PE)

	7.	Sheath
		Polyethylene (PE)

AERIAL INSTALLATION | AE SERIES

Slotted core design, integral bearer "figure-8", four fiber ribbon, 4-96 fibers

This is a four fiber ribbon aerial installation cable with integral bearer for installation on poles with a maximum span distance of 75m.

It can be supplied with 4 to 96 fibers using four fiber ribbon; either single-mode, multimode or both.

High packing density of the fibers is provided with the ribbon technology. This enables a small outer diameter of the cable even for large fiber counts.

The strength member and the slotted core design provide superior protection for the ribbon fibers.

A suspension steel wire integrated (integral bearer) with the sheath creates the characteristic "figure-8" profile well known for easy installation. The technique is the same as the one used for copper cables of the same design.

Water blocking filling compound prevents water penetration along the cable.

TECHNICAL DATA

Temperature range*
operation storage installation	-30 to 70°C -40 to 70°C -10 to 55°C
Performance of ribbon
strippability of ribbon stripping force ribbon	mechanical 10 - 20N
Bending radius*
temporary unloaded permanent and during installation	10 x cable diameter 15 x cable diameter
Tensile force*
during installation permanent with ice and wind load	9.0kN 9.0kN
Crush resistance*
	5.0kN
Water penetration
complies with	IEC 60794-1-2-F5
Delivery information	4-48 fibers	52-96 fibers
cable weight supplied lengths drum type	290kg/km 2km - 6km W14 - W22	340kg/km 2km - 6km W16 - W22
* Tested in accordance with IEC 60794-1-2

For more product information, please call +60.3.5519.5699 or email us at marketing@opcom.com.my


Copyright © 2005 - 2008 OPCOM CABLES SDN BHD. All Rights Reserved.